What's wrong with the thick material sewing machine not feeding properly?
[Time: 2019-12-16 Click: 94]
In the process of using extra-heavy material sewing machines , occasional accidents may occur, which will have a greater impact on the smooth progress of the work. For different problems, the solutions are different. We will talk about the reasons that cause the equipment to not feed properly.
In the process of sewing with a heavy-duty sewing machine, the sewing speed and stitch length may sometimes be uneven. The movement of the sewing material depends on the feed dogs and the presser foot. If the cloth does not run smoothly, it can basically be considered as the result of these two failures or improper adjustments. When the pressure is not adjusted properly, if the pressure of the presser foot is too small to press the fabric tightly, it will cause irregular sewing, and if the pressure is too large, the fabric will not move.
At the same time, because of the heavy-duty sewing machine being used for a long time, the friction between the feed teeth and the presser foot will be abraded for a long time. If the surface is excessively worn, it will cause the phenomenon of poor feeding. The same is true for the feeding teeth. If the surface is flattened, it may slip during the feeding process, which will cause the equipment to fail to feed and sew normally.
The above is the analysis of Xinxiang Gongseom Sewing Machine Co., Ltd.'s analysis of the problem of abnormal feeding of extra thick sewing machines. For more questions and confusion, please feel free to contact us and look forward to your visit.Previous page: How to maintain a thick material sewing machine in a good running state Next page: Introduction to the threading structure of a thick material sewing machine